APPLICATION ADVICE

APPLICATION ADVICE


Feel free to send us a picture of your decoration


Application conditions


For all surfaces:
The surface to receive the stickers should be smooth and clean (remove dust and residue from walls, windows should be cleaned and non-greasy).


Storage conditions


Store the stickers flat or rolled up in a clean place away from sunlight and moisture.
Maintain a temperature between 15 and 25°C.
The storage time should not exceed one year.


Application conditions


-    Smooth the sticker with a squeegee
-    Carefully remove the white backing paper
-    Place your adhesive in the desired spot
-    Smooth firmly from the centre to the edges
-    Remove the transparent paper by gently pulling it while flat
-    Smooth the edges of the sticker
Chase the bubbles
Pierce the bubble with a needle or a box cutter so that the trapped air can escape, and then smooth with your fingers.



Application of a large format


-    Position your sticker (with its white backing paper still on) with tape, in the desired spot.
-    Lift up half of the transparent paper and cut the white backing paper.
-    Smooth firmly from the centre to the edges
-    Remove the tape
-    Lift the other half of the transparent paper and remove the rest of the white backing paper
-    Keep the sticker straight and use the squeegee to smooth from the centre toward the edges
-    Remove the transparent paper by gently pulling it while flat
-    Smooth the edges of the sticker